Product Manual

11 Maintenance
100_0101_mt_0018.fm 25
11.3 Maintenance work
Working in the workshop
Perform maintenance work in a workshop on a workbench. This has the following benefits:
 Protection of the machine of contamination on the construction site.
 A level and clean work surface makes work easier.
 There is a better overview over small parts and they are not lost as easily.
Checking the wear dimensions of the vibrator head
Wear dimensions:
 Minimum diameter of lower tube øL
L
 Minimum diameter of vibrator head øL at measuring point L
 Length of vibrator head L
L
Wear is highest at the end of the vibrator head.
Let the vibrator head be exchanged by your Wacker Neuson contact if the wear dimensions are reached
at a certain point.
The vibrator head assembly must be replaced by the service department of the Wacker_Neuson contact
partner.
Dimensions in bold are wear dimensions.
Dimensions in brackets are original dimensions of new machines.
WARNING
A damaged machine part, protective hose or power cable can result in personal injury
caused by electric current.
 Do not operate a damaged machine.
 Have a damaged machine repaired immediately.
Machine
type
Dimensions for vibrator head and lower tube [mm]
øL
L
L
L
øL L
IEC38 33 (38) 275 (285) 35 (38) 180
IEC45 38 (45) 315 (327) 42 (45) 194
IEC58 50 (58) 390 (400) 54 (58) 205