Product Manual

4 Safety
100_0101_si_0006.fm 13
Protecting the power cable
Do not use the power cable to pull or lift the machine.
Do not unplug the power cable by pulling on the cable.
Protect the power cable from heat, oil and sharp edges.
If the power cable is damaged or the plug is loose, have it replaced immediately by your Wacker Neuson
representative.
Protecting the protective hose
 Do not drag the protective hose over sharp edges.
 If the vibrator head jams in the reinforcement, do not pull out the protective hose suddenly or violently.
Free the vibrator head by carefully moving it back and forth.
4.8 Maintenance
Maintenance work
Service and maintenance work must only be carried out to the extent described in these operating
instructions. All other procedures must be performed by your Wacker Neuson representative.
For further information, refer to chapter Maintenance.
Disconnecting the machine from the electric power supply
Before carrying out service or maintenance work, pull the plug out of the plug receptacle in order to
disconnect the machine from the electric power supply.
Cleaning
Always keep the machine clean and be sure to clean it each time you have finished using it.
Do not use gasoline or solvents. Danger of explosion!
Do not use high pressure washers. Permeating water can damage the machine. When electrical
equipment is present, this can pose a serious injury risk from electric shocks.