User manual

wc_tx003350gb.fm
34
Operation HIF 690
4.6 Preliminary Checks
Requirements Machine on a flat, level surface
Before
starting
Before starting the machine, check the following items:
 Engine coolant level
 Engine oil level
 Engine air filter and housing—replace soiled filters
 CALFLO™ AF level
 Diesel fuel level—1/4 tank minimum
 Condition of intercooler and radiator cooling fins
 Panels and doors closed
 Battery charge and terminal connection
 Air inlet and output areas open and free of obstructions.
NOTICE: Top off the lubricating and CALFLO™ AF levels. See "Lubricants" table in
the Technical Data chapter. When doing so, use clean containers and funnels to
avoid contamination.
Before
operating
Before operating the machine:
 Check the machine for fluid leaks. Repair them before operating.
 Check the work area for obstructions. Remove all obstructions.
 HIF 1200 machines —Verify that the fuel tank valve under the engine is open.
 Allow the engine to warm up according to the following schedule:
Ambient Temperature Time (min.)
Above 0°C (32°F) 5
Below 0°C (32°F) 15