User manual

wc_tx003350gb.fm
33
HIF 690 Operation
4.4 Control Panel
4.5 Preparing the Machine for First Use
1. Make sure all loose packaging materials have been removed from the machine.
2. Check the machine and its components for damage. If there is visible damage,
do not operate the machine! Contact your Wacker Neuson dealer immediately
for assistance.
3. Take inventory of all items included with the machine and verify that all loose
components and fasteners are accounted for.
4. Attach component parts not already attached.
5. Add fluids as needed and applicable, including fuel, engine oil, and battery acid.
6. Move the machine to its operating location.
Ref Description Ref Description
a Engine shutoff test handle g Throttle control switch
b Fuel gauge h ON/OFF/Glow plug switch
c Plate pressure gauge j Start button
d Temperature gauge k Murphy switch (engine override)
e Thermostat control m Tachometer
f Lockable master switch — —