Operator`s manual

GPi 3200 / 4300 Maintenance

wc_tx001240gb.fm 41

3.4 Cleaning the Air Cleaner

When

Clean the air cleaner every 50 hours of operation.

Prerequisite

Engine is stopped and cool to the touch

Description

The air cleaner assembly consists of two urethane forms housed inside the air

cleaner body. A clean air cleaner prevents dirt from entering and damaging the

engine.

Procedure

Follow the procedure below to clean the air cleaner.

1. The air cleaner assembly (L) is located on the right side of the machine behind

the control panel. Unhook and remove the air cleaner body cover (L1).

2. Remove the urethane forms (L2) from the air cleaner body.

3. Rinse the urethane forms with clean water. Squeeze out excess water (do not

twist) and dry the urethane forms thoroughly.

4. Wipe the inside of the air cleaner body with a clean, dry cloth.

5. Re-install the urethane forms inside the air cleaner body.

6. Re-install the air cleaner body cover.

WARNING

Burn hazard. The engine and exhaust pipe become extremely hot during operation.

f Stop the engine and allow the machine to cool before cleaning the air cleaner.

wc_gr006670