Operator`s manual

Operation GPi 3200 / 4300
26 wc_tx001875gb.fm
Multi monitor
(a)
The multi monitor (a) displays the status of various machine functions while the
generator is operating.
AC
receptacles
(b, c)
AC power is supplied through two 20A receptacles (b) and a 30A twist-lock
receptacle (c). Use only grounded, three-leg electrical plugs when connecting AC
equipment to the machine.
Ground lug (d) The ground lug (d) is the terminal for grounding the generator. See topic Ground
Lug for more information.
DC terminals
(e)
The generator provides DC power for charging batteries. The red terminal is
positive (+); the black terminal is negative (-). See topic Using DC Power.
DC circuit
breaker (f)
The DC circuit breaker (f) shuts off the electrical current when the current exceeds
its limit, or a malfunction occurs in a piece of equipment connected to the
generator.
 The DC circuit breaker has activated when the button pops out.
 To reset the DC circuit breaker, press the button.
Key switch (g) The key switch (g) is used to start and stop the engine. See topic Starting the
Generator (Electric Start).
Ref. Description Ref. Description
a Multi monitor k Operation hour indicator light
b AC receptacles, 20A l Voltage indicator light
c AC receptacle, 30A m Frequency indicator light
d Ground lug n LED display changeover switch
e DC terminals o Auto-power saving switch
f DC circuit breaker p Auto-power saving indicator
g Key switch q
Engine oil level warning indicator light
h Engine switch r AC circuit breaker
jLCD sGFCI