Operator`s manual

GPS 9700 Maintenance
wc_tx000955gb.fm 35
4 Maintenance
4.1 Maintaining the Emission Control System
Normal maintenance, replacement, or repair of emission control
devices and systems may be performed by any repair establishment
or individual; however, warranty repairs must be performed by a
dealer/service center authorized by Wacker Neuson. The use of
service parts that are not equivalent in performance and durability to
authorized parts may impair the effectiveness of the emission control
system and may have a bearing on the outcome of a warranty claim.
4.2 Periodic Maintenance Schedule
The table below lists basic machine and engine maintenance. Tasks
designated with check marks may be performed by the operator.
Tasks designated with square bullet points require special training
and equipment.
Refer to the engine owner’s manual for additional information.
* Service more frequently in dusty conditions
Daily
before
starting
After
first
5 hrs.
Every
50
hrs.
Every
100
hrs.
Every
year
Check fuel level.
3
Check engine oil level.
3
Inspect fuel lines.
3
Inspect air filter. Clean as needed.
3
Check external hardware.
3
Change engine oil.*

Check shockmounts. Replace when
necessary.

Replace oil filter.*

Check and clean spark plug.

Replace air cleaner.*

Check and adjust valve clearances.*

Replace in-line fuel filter.*
