Product Manual

Assembly Instructions—Wheel Kit
Continued from the previous page.
This procedure continues on the next page.
wc_tx004653en.fm 3
Preparatory work
1. Stop the engine.
2. Remove the ignition key.
3. Verify that all wheel kit parts are present.
Lifting the machine

CAUTION
This machine, while compact, is heavy
enough to cause injury if proper lifting
techniques are not used. Observe the
following guidelines when lifting the
machine.
• Do not attempt to lift and carry the machine
unassisted.
• Use appropriate lifting equipment such as slings,
chains, hooks, ramps, or jacks.
• Make sure lifting equipment is attached securely and
has enough weight-bearing capacity to lift or hold the
machine safely.
Item Part Number Quantity Description
1 5000177375 1 Right handlebar
2 5000177374 1 Left handlebar
3 5000177377 1 Right support bracket
4 5000177376 1 Left support bracket
5 5000177378 1 Axle shaft
6 5000177379 2 Wheels
7 5000171857 2 M20 washers
8 5000171858 2 Cotter pins
9 5000177380 1 Main support bracket
10 5000177381 1 Spacer
11 5000177382 2 Cushion mounts
12 5000177386 6 M8 x 20 bolts
13 5000171855 8 M8 x 16 bolts
14 5000177389 3 M6 x 28 bolts
15 5000171803 14 M8 nuts—Tighten to a torque of 18-25 Nm (13-18 ft. lbs.)
16 5000177390 3 M6 nuts—Tighten to a torque of 8-12 Nm (6-9 ft. lbs.)