Product Manual

wc_tx004574gb.fm
44
Maintenance GP
5 Maintenance
5.1 Maintaining the Emission Control System
For machines sold in North America:
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by
Wacker Neuson. The use of service parts that are not equivalent in performance
and durability to authorized parts may impair the effectiveness of the emission
control system and may have a bearing on the outcome of a warranty claim.
5.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks
 may be performed by the operator. Tasks designated with square bullet
points  require special training and equipment.
Daily
before
starting
After
first
20 hr
Every
50 hr
Every
100 hr
Every
300 hr
Check the fuel level.

Check the engine oil level.

Inspect the air filter. Replace as needed.

Check external hardware.

Clean the air cleaner element.
1

Inspect the shockmounts for damage.

Change the engine oil.
1

Clean the sediment cup or fuel strainer.

Check and clean the spark plug.

Check and adjust the valve clearance.

Clean the fuel tank.
1

Check condition of the fuel lines.
Replace when necessary.

1
Service more frequently in dusty conditions.