Operator`s manual

G 25 Factory-Installed Options
wc_tx001085gb.fm 63
6 Factory-Installed Options
This machine may be equipped with one or more of the following
factory-installed options. To verify if any of these options are installed
on your machine, contact Wacker Neuson Corporation at 1-800-770-
0957. A nameplate listing the Model Number, Item Number, Revision,
and Serial Number is attached to each unit. Please have this
information available when contacting Wacker Neuson Corporation.
The illustrations shown in this chapter represent typical installations.
The factory-installed options on your machine may look different.
6.1 Engine Block Heater Option
The engine block heater option includes a block heater (a) with a cord
(b). The function of the block heater is to heat the engine coolant/
engine block to improve cold-weather engine starting. Plug the cord
into a 120V power supply.