Operator`s manual

Using the LCD Panel and Keypad Mobile Generator
58 wc_tx001182gb.fm
5.3 Adjusting Screen Contrast
The display contrast of the LCD panel can be adjusted to suit the
operator’s preference, or for increased visibility in jobsites with low or
bright ambient light.
5.3.1 To access the main menu, press the right arrow button (1) on the
keypad (g).
Note: If there are active alarms or pre-alarms, press the left arrow
button (4) three times to access the main menu.
5.3.2 Using the up/down arrow buttons (2,3), select SETTINGS, and press
the right arrow button.
5.3.3 Select GENERAL SETTINGS. Press the right arrow button.
5.3.4 Select FRONT PANEL HMI. Press the right arrow button.
5.3.5 Select LCD CONTRAST. Press the right arrow button.
5.3.6 If necessary, enter your password. (See Entering Passwords for more
information.)
5.3.7 Use the up/down arrow buttons to change the contrast as desired.
Press the check mark buttonwhen finished.
5.3.8 Exit by repeatedly pressing the left arrow button until the LCD panel
display returns to monitoring status.