Operator`s manual

G 25 Lifting and Transporting
wc_tx001183gb.fm 29
3 Lifting and Transporting
3.1 Lifting the Machine
A central lifting eye is located at the top of the generator and is
attached to a lifting frame inside the housing.
Crushing / machine damage hazard. Make sure the lifting devices
have sufficient capacity to lift the unit safely. Refer to Technical Data
for the proper operating weight of the generator.
When lifting the generator, attach a hook or sling securely to the lifting
eye.
3.2 Towing the Machine
See Graphic: wc_gr000510
The generator trailer is equipped with brakes, lights, and coupler
connection. Before towing the generator, perform the following:
3.2.1 Check that the towing vehicle and hitch have a rating equal to or
greater than the GVWR. Refer to the Technical Data.
3.2.2 Check the condition of both the coupler and hitch. DO NOT tow the
trailer if the coupler or hitch is damaged.
3.2.3 Make sure that the hitch and coupler are compatible. The generator
trailer is equipped with either a pintle type coupler (a) or 50 mm (2 in.)
ball coupler.
3.2.4 Check that the directional and running lights on the trailer are working.
3.2.5 Connect the safety chains (c) using a crossed pattern under the trailer
tongue.
3.2.6 On trailers with surge or electric brakes, connect the breakaway cable
(b) on the trailer coupler to the rear bumper or frame of the vehicle.
This cable will actuate the brake system on the trailer if both the
coupling and safety chains have failed. The breakaway cable is not a
parking brake and should not be used as one.
3.2.7 Check that all fasteners on the coupling are secure.
3.2.8 Check the tread wear and inflation of tires. Make sure that all lug nuts
are in place and are tight.
3.2.9 Check the operation of the optional surge brakes by braking the
vehicle at a slow speed before entering traffic. Both the vehicle and the
trailer should brake smoothly. If the trailer seems to be pushing, check
the fluid level (d) in the surge brakes or the operation of the electric
brakes.
A film of grease on the coupler will extend coupler and ball life and
eliminate squeaking. Wipe the coupler and ball clean and apply fresh
grease each time the trailer is towed.
WARNING