Operator`s manual

wc_td000585gb_FM10.fm
75
Rammer
Technical Data
7.11 BS 70-2
1
Net engine power rating per 80/1269/EEC and ISO 3046-1. Actual power output may vary due to conditions of specific use.
7.12 BS 70-2 Operating Weight
Machine BS 70-2
Engine model WM80
Engine speed - operating rpm 4400
Engine speed - idle rpm 2000 ± 100
Max. rated power @ rated speed
1
kW (hp) 2.0 (2.7) @ 4400 rpm
Clutch engagement rpm 2500 ± 100
Spark plug type Champion QL87YC
Electrode gap mm (in.) 0,76
Cylinder head compression (cold) bar/cm
2
(psi)
8.0–9.7 (120–140)
Air cleaner type Four-stage with cyclonic precleaner
Fuel specification Gasoline-oil mixture
Gasoline/2-cycle oil mixing ratio 50:1 – 100:1
Oil specification, 2-cycle Use only Wacker Neuson two-cycle or other fully
synthetic oil meeting the NMMA TC-W3, JASO FD, or
ISO-L-EGD specification.
A gasoline/oil ratio in a range from 50:1 to 100:1 can be
used. For optimum engine performance and durability, a
100:1 ratio with a fully synthetic oil meeting the
specification described above is preferred.
Fuel tank capacity L (qt) 3.0 (3.2)
Fuel consumption L (qt)/hr 1.3 (1.4)
Running time hr 2.3
Ramming system lubrication type SAE 10W30
Ramming system oil capacity ml (oz.) 890 (30)
Machine
Item Number
BS 70-2
5200000670, 5200000671
5200000676, 5200000684
Operating weight kg (lb) 74 (164)