Operator`s manual

wc_tx003553gb_FM10.fm
54
Rammer
Maintenance
5.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
1
Change ramming system oil after first 50 hours of operation.
Daily
before
starting
After
first 5
hours
Every
week
or 25
hours
Every
3 months
or 300
hours
Every 5
months
or 500
hours
Every
year
Check air filter. Replace air
filter as needed.

Check ramming system oil
level in sightglass.

Check fuel line and fittings for
cracks or leaks. Replace as
needed.

Tighten ramming shoe
hardware.

Inspect the machine.

Clean engine cooling fins.

Clean and check spark plug
gap.

Change ramming system oil.
1

Inspect central lifting cable for
wear, damage, or abuse.

Replace in-line fuel filter
assembly.

Replace spark plug.

Inspect and clean in-tank fuel
filter.
