Operator`s manual

EH 6, EHB 7 7 Operation
Operator's manual 29
Version 001
7.2 Adjusting the machine
7.2.1 Operating mode (only EHB 7)
Selecting the operating mode
Check position of changeover switch.
Adjust the setting of the changeover switch if it does not correspond with the de-
sired application:
f Turn changeover switch half a turn until it snaps into place.
WARNING
Danger of injury with uncontrolled start up of the machine during switching.
f Actuate changeover switch only when machine is inactivated and has come
to a complete standstill.
Item Designation
1 Changeover switch