Repair manual

Troubleshooting the Burner Cub 200/300
58 ghi_tx001207gb.fm
6.10 Checking the Fuel Pump Adapter
Requirements  Machine turned off
 Power supply disconnected
Procedure Perform the following procedure to check the fuel pump adapter.
1. Turn the machine off.
2. Open the access panel (a).
3. Locate the fuel pump (b).
4. Loosen the three set screws (c).
5. Remove the fuel pump (b) from the motor.
6. Check the fuel pump adapter (d) and replace the fuel pump adapter if it is
damaged.
Result The fuel pump adapter has now been checked. Reassemble the machine.