Repair manual

Cub 200/300 Troubleshooting the Burner
ghi_tx001207gb.fm 51
6.6 Checking the Fuel Solenoid
Requirements  Multimeter
 Air pressure switch checks OK
Procedure Perform the procedure below to check the fuel solenoid.
1. Turn the machine off.
2. Open the access panel (a).
3. Locate the fuel solenoid (b) and disconnect it.
This procedure continues on the next page.
WARNING
Electric shock hazard. High voltage exists at the fuel solenoid and other compo-
nents inside the machine when the machine is turned on.
f Use extreme care and appropriate arc flash protective measures when working
inside the machine.