Repair manual

Troubleshooting the Burner Cub 200/300
38 ghi_tx001207gb.fm
Continued from the previous page.
Fuel problems For fuel system problems, check the following items in the sequence listed.
Depending on the results of the fuel pressure, continue with the appropriate
sequence below.
Order Component See topic
1. Fuel tank/supply n/a
2. Fuel filter n/a
3. Air band setting 3.6
3. Fuel filter heater 6.3
4. Fuel pressure 3.7
If fuel pressure is OK: If fuel pressure is low:
Order Component
See
topic
Order Component
See
topic
1. Check output voltage from
the control board.
6.4 1. Check the fuel lines. 6.9
2. Check the air pressure
switch.
6.5 2. Check the fuel pump
adapter.
6.10
3. Check the fuel solenoid. 6.6
4. Check the flame head. 6.7
5. Check fuel flow from the
nozzle.
6.8