Repair manual

Cub 200/300 Troubleshooting Basics
ghi_tx001207gb.fm 27
4 Troubleshooting Basics
Where to Begin
Procedure Perform the procedure below to determine where to begin.
1. Connect the power cord to a 120 VAC power supply.
2. Turn the machine on.
3. Turn the machine off.
If Then
The blower runs, the problem is with the burner system.
See Chapter 6 Troubleshooting the Burner.
The blower does not run, the problem is with the blower system.
See Chapter 5 Troubleshooting the Blower.
The motor hums, the problem is with the starter capacitor.
See Topic 5.4 Checking the Capacitor.