Operator`s manual

Maintenance HI 110 / 200 / 300
50 ghi_tx001450gb.fm
7.7 Inspecting the Electrical Connections
After disconnecting the power cord, check all electrical connections for the
following:
 Proper connections. Be sure that all connections are complete and tight.
 Corrosion. Clean or replace if necessary.
 Damaged wires/connectors. Replace if necessary.
 Proper ground.
7.8 General Cleaning Guidelines
Prerequisites  Machine shut down
 Machine cool
General
cleaning
Clean the following areas to ensure proper operation.
Item Method/task
Burner Remove all dirt and debris. Ensure air intake area is
unobstructed.
Hoses, connectors,
and couplings
Wipe clean with cloth.
Trailer (if equipped) Clean with compressed air: 50 PSI maximum.
Covers/machine
exterior
Wipe clean with cloth.
Air inlets/ouputs Remove all dirt and debris. Ensure air intake area is
unobstructed.