Operator`s manual

Operation HI 110 / 200 / 300

34 ghi_tx001447gb.fm

4.16 Installing and Using the Remote Thermostat

Requirements

 Remote thermostat

 Pre-starting checks complete

Procedure

Follow the procedure below to install and use the remote thermostat.

1. Remove the protective cap (a) from the control panel receptacle.

2. Connect the remote thermostat (b) to the control panel receptacle (c).

3. Set the sensor end (d) within the area to be heated.

4. Adjust the target temperature with the dial (e).

Result

The machine will now be controlled by the remote thermostat.

wcghi_gr007405