Operator`s manual

Operation HI 110 / 200 / 300
30 ghi_tx001447gb.fm
4.11 Pre-Starting Checks
Requirements  Machine properly positioned
 Power connected to the machine
Checks Before starting the machine, check the following items:
Result The machine is ready to turn on.
Item Task
Fuel sight gauge (if equipped) Check that the fuel tank is full (if applicable).
Fuel tank cap Check that the fuel tank cap (if applicable) is
secure.
Operation mode switch Check that the operation mode switch is in the
OFF position.
Main control panel Check that proper power supplies have been con-
nected at the main control panel. See topic
Connecting Power to the Machine.
Remote thermostat (if installed) Check that the remote thermostat has been cor-
rectly installed. See topic Installing the Remote
Thermostat or Thermostat Receptacle Plug.
Ducts and duct adapters Check that all ducts and duct adapters have been
properly installed. See topic Installing the Heater
Duct.