Operator`s manual

Safety Information Cub 200/300/300 HD
wcghi_si000212gb.fm 8
2.1 Operating Safety
Familiarity and proper training are required for the safe operation of
equipment! Equipment operated improperly or by untrained personnel
can be dangerous! Read the operating instructions contained in this
manual and familiarize yourself with the location and proper use of all
controls. Inexperienced operators should receive instruction from
someone familiar with the equipment before being allowed to operate
the machine.
2.1.1 Be sure the machine is on a firm, level surface and will not tip, roll,
slide, or fall while operating.
2.1.2 NEVER start a machine in need of repair.
2.1.3 Keep unauthorized personnel, children, and pets away from the
machine.
2.1.4 Always operate machine with all safety devices and guards in place
and in working order. Do not modify or defeat safety devices. Do not
operate machine if any safety devices or guards are missing or
inoperative.
2.1.5 NEVER run the machine indoors or in an enclosed area unless
adequate ventilation, through such items as exhaust fans or hoses, is
provided and if local and national codes permit. Exhaust from the
burner contains poisonous carbon monoxide gas. Exposure to carbon
monoxide can cause loss of consciousness and may lead to death.
2.1.6 Do not smoke while operating the machine.
2.1.7 NEVER run the machine in areas that contain flammable objects,
fuels, or products that produce flammable vapors.
2.1.8 NEVER connect ductwork between the exhaust outlet port and the
supply air inlet port.
2.1.9 NEVER block the air inlet or outlet.
2.1.10 The installation of this machine must be in accordance with the
regulations put forth by all governing bodies having jurisdiction
including the Canadian Standard B139.
WARNING