Product Manual

wc_tx003232gb.fm

Operation CT 24-4A

4.6 Unfolding Handle

On new machines the pipe handle comes folded with the following components

attached: Twist pitch control (a), Operator Present Lever (b), throttle lever (c),

hinge pin (d), and adjustable lever (e).

To unfold and secure the pipe handle assembly:

1. While holding the hinge pin, unscrew and remove the adjustable lever and metal

washer.

2. Remove the hinge pin.

3. Straighten the pipe handle and re-insert the hinge pin.

4. Replace the metal washer over the threaded end of the hinge pin, and re-install

the adjustable lever.

5. Tighten the adjustable lever to lock the pipe handle in its fully opened position.

wc_gr004384