Product Manual

wc_tx003231gb.fm
21
CT 24-4A Lifting and Transporting
3.2 Transporting the Machine
Requirements  Transport vehicle capable of handling the weight of the trowel
 Suitable ropes or chains
Procedure Follow the procedure below to tie down and transport the machine.
1. Lift the trowel onto the transport vehicle.
2. Position the handle so that it does not protrude outside the footprint of the
transport vehicle.
3. Connect the ropes/chains to the ring guard of the trowel as follows.
a.Connect them as low on the ring guard as possible to minimize stress on the
gearbox output shaft.
b.Use a crossing pattern as shown.
4. Connect the ropes/chains to the transport vehicle. Do not overtighten them.
Result The machine is now ready to be transported.