Repair manual

CRT Repair Engine
wc_tx000097gb.fm 77
8.1.28 Replace air cleaner base and attach with 3 bolts. Torque to 9.9 Nm (88
in. lbs.). Open choke (g).
8.1.29 Install air filter and cover.
8.1.30 Replace throttle cable.
8.1.31 Tighten up throttle mounting nuts.
8.1.32 Install cotter pin (f) from throttle cable connection.
8.1.33 Attach auxiliary power cable (e).
8.1.34 Attach battery cable (d).
8.1.35 Attach and tighten battery terminal nut (c) to starter.
8.1.36 Connect relay (b) and replace tie wrap.
8.1.37 Plug in single yellow to pink/purple/orange wires.
8.1.38 Plug in single white wire to engine harness.
8.1.39 Plug in single black wire to engine harness.
8.1.40 Plug in main engine harness (a).
8.1.41 Connect fuel line at fuel pump.
8.1.42 Open fuel valve on fuel tank.
8.1.43 Connect battery.
8.1.44 Apply Loctite 243 to bolts and install cross brace. Torque to 25 Nm (18
ft.lbs.).