Repair manual

CRT Repair Steering and Pitch Control
wc_tx000096gb.fm 55
7.6 Removal and Installation of Electric Steering Joysticks
See Graphic: wc_gr002341
Removal:
7.6.1 Disconnect negative battery cable.
7.6.2 Remove the 4 screws from the side of the housing and lift off.
7.6.3 Unplug the joystick from the wiring harness.
7.6.4 Remove the 4 nuts, screws and washers retaining the joystick in the
housing.
7.6.5 Lower the joystick and backing plate from the housing.
Installation:
7.6.6 Position backing plate onto joystick.
7.6.7 Align joystick in housing and insert from bottom. Insert 4 screws with
washers into top of housing and through backing plate. Install locknuts
and tighten.
7.6.8 Carefully connect wiring harness into joystick.
7.6.9 Lower housing assembly onto mount. Apply medium strength thread-
lock to the 4 screws and install.
7.6.10 Connect negative battery cable. Turn key to the “ON” position and
check joystick function.