Repair manual

Spiders and Gearboxes CRT Repair
wc_tx000583gb.fm 56
Installation:
6.2.12 Install the spiders to the gearboxes. See section Spider Removal and
Installation.
6.2.13 Position the gearboxes underneath the trowel.
6.2.14 Align the bolt holes with the bearing flanges (l). Secure the bearing
flanges to the gearboxes with bolts (k) and washers. Torque the bolts
to 86 Nm (63 ft.lbs.).
6.2.15 Secure the pitch control assemblies (i) to the machine.
6.2.16 Secure the pitch control cables (h) to the yokes.
6.2.17 Connect the work light harness.
6.2.18 For the right-side gearbox:
• Position the water tank onto the frame and secure it with bolts
from underneath.
• Attach the water line to the water tank and tighten the clamp.
6.2.19 For the left-side gearbox:
• Position the fuel tank on the frame and secure it with bolts from
underneath.
• Slide the fuel hose onto the fitting and tighten the clamp.
6.2.20 Secure the drive train to the gearbox. See Drive Line Teardown and
Rebuild.
6.2.21 Align the blades. See section Gearbox Basics.