Repair manual

Engine Troubleshooting and Replacement CRT Repair
wc_tx000585gb.fm 146
8.15 Installing the Honda Engine
See Graphic: wc_gr003431
This procedure requires a lift or crane capable of lifting 136 kgs. (300
lbs.).
8.15.1 Position the engine onto the machine’s frame.
8.15.2 Temporarily secure the engine and the battery ground cable to the
machine with four bolts from underneath the machine.
8.15.3 Reconnect the three wires of the oil pressure switch harness (h).
8.15.4 Reconnect the throttle (f) and choke cable (g).
8.15.5 Reinstall the screw (e) and the ground wires to the engine.
8.15.6 Reconnect the relays to the engine (d) and secure them with wire ties.
8.15.7 Reconnect the wiring to the starter motor (c).
8.15.8 Reinstall the cross brace (b).
8.15.9 Reconnect the fuel hose (a) to the fuel filter.
8.15.10 Open the fuel valve on the fuel tank.
8.15.11 Reinstall the drive belt. See section Belt Replacement.
8.15.12 Reconnect the battery.