Repair manual

Engine Troubleshooting and Replacement CRT Repair
wc_tx000585gb.fm 132
8.3 Checking Voltage to Starter Motor
See Graphic: wc_gr003435
Battery voltage is provided directly to the starter motor via the red wire
(a). Check that the red wire is securely fastened to the starter motor.
Battery voltage is also provided to the starter solenoid via the black
wire (b) when the ignition switch is in the START position. This wire
has a female spade connector. Check that it is connected securely to
the starter solenoid. Clean the terminal if necessary.
wc_
g
r003435
a
b
a
b
Vanguard Honda