Repair manual

CRT Repair Steering and Pitch Control
wc_tx000584gb.fm 99
7.18 Error Code 222—Side Load Pin Short Circuit
7.18.1 Check the wire connections at the load pin (L2) and at the control
board connector (P2). Reconnect the wiring if needed. If the fault
condition remains, continue.
7.18.2 Check the continuity of the wiring between the control board and the
load pin. To do so, disconnect the P2 connector from the control board
and the L2 connector from the load pin. Then, check the continuity of
the wiring between pin 4 of the P2 connector and terminal A of the L2
connector. Also check pin 5 to terminal C, and pin 6 to terminal B.
• If any of the wires is faulty, repair or replace the wiring.
• If the wiring is OK, reconnect it and continue.
wc_
g
r003388
M1
M3
L3
L1
LJS
RJS
C1
P2
P1
A
12
3456
1211
10987
B
C
D
E
F
M2
L2
4 - A
5 - C
6 - B