Repair manual

8 Assembly
85 Clutch
9. Remove the stop wedge.
10. Attach the guard (6) directly on the cylinder, then screw on the seal (5) and muf-
fler (1) with Torx screw (2), screw (3) with disc (4) and tighten them (torque
wrench setting 8 Nm).
11. Attach the V-belt (13).
12. Screw the cover (14) onto the crankcase half (7) with the Torx screws (15).
13. Tighten the V-belt, see Chapter 10.4.