Repair manual

8 Assembly
72 Tank
1. Insert the suction hose (10), attach the suction head (7).
2. Screw in the fuel cap (9) and seal (8).
3. Mount the throttle lever (4), spring (3), throttle lever lock (2), and the gasoline
locking pin (11) and insert them into the handle shell.
4. Fasten with the parallel pins (1).
5. Using a mandrel (x), press the vent valve (6) into the tank (5) far enough so that
the white plastic tip (y) protrudes about 2 - 3 mm.
6. Screw the tank (5) together with the premounted crankcase.