Repair manual

8 Assembly

70 Cylinder/Crankshaft

13. Place the piston support from the set of piston rings (0117575) onto the crank-

case and set the piston (3) on top.

14. Press the piston ring (17) together with the clamp set.

15. Slide the cylinder (2) on the piston (3). At the same time, move the strap (x)

downward or remove it afterward.

16. Fasten the cylinder (2) with the Torx screws (16) (torque wrench setting

14 + 1.0 Nm).

17. Insert the decompression valve (1).