Repair manual

Carburetor Inspections 7 Disassembly/Inspection

59 Carburetor/Inspection

8. For cleaning purposes, you can take out the carburetor fuel screen (5) out of the

carburetor body by carefully using a pointed object.

9. After you clean the carburetor fuel screen (5), insert it with a pin.

10. To test the carburetor while installed, take the fuel line out of the tank. Pull off the

suction head. Set the pressure gauge (0079264) onto the reducing socket.

11. Apply 0.5 bar of pressure to the carburetor. Excessively high pressures can dam-

age the diaphragms. The pressure should remain constant.