Repair manual

6 Disassembly

48 Cylinder/Crankshaft

1. Unscrew the screws (16) from the cylinder (2).

2. Pull the cylinder (2) with cylinder base gasket (6) off of the crankcase halves

(9,13) and piston (3).

3. Take out the wire snap ring (5) from the ring groove in the piston (3) using nee-

dle-nose pliers (x).

4. Press out the piston pin (4) and take off the piston.

5. Press the needle cage (7) out of the connecting rod of the crankshaft (10).