Repair manual

6 Disassembly

46 Tank

1. Only if it becomes necessary, press in the vent valve (6) into the tank (x) with a

mandrel and take it out through the filler opening with needle-nose pliers.

2. Press the two cylinder bolts (1) out of the handle shell (5).

3. The throttle lever (4), spring (3), throttle lever lock (2), and the gasoline locking

pin (11) can now be replaced.

4. Pull the suction hose (10) out of the tank and remove the suction head (7).

5. Screw off the fuel cap (9) with seal (8).