Repair manual

6 Disassembly

43 Ignition system module/intake manifold

13. Pull the short circuit cable (1) out of the seat in the choke shaft (18).

14. Release the ground cable (4) from the plug connection of the contact spring (9).

15. Block the piston with the piston stop wedge (0117571).

16. Unscrew the nut (21) and take off the disc (20).

17. Pull off the magneto flywheel (19) with the puller (0068900).

CAUTION

To prevent damage to the crankshaft, always use the protection cap that

belongs to the puller.

4 9