Repair manual

6 Disassembly

41 Ignition system module/intake manifold

5. Unscrew the screws (3,5) and remove the hood (2).

6. The screw (5) also functions as the fastener for the ground cable.

7. Unscrew the Torx screws (11) from the magneto igniter (12), disconnect the ig-

nition cable (10).

8. Release the short circuit cable (1) from the plug connection.

9. Release the hose clamp (14) from the suction hose.

10. Pull off the suction hose (15) from the cylinder (13).