Repair manual

6 Disassembly

30 Clutch

1. Unscrew the Torx screws (15) out of the cover (14) and take off the cover (14).

2. Take off the V-belt (13).

3. Unscrew the Torx screws (2,3) with the spring washers (4) from the exhaust (1).

4. Take off the exhaust (1), seal (5) with guard (6).

5. To disassemble the clutch (12) and clutch drum (9), you must block the piston.

To do this, slide the piston stop wedge (0117571) into the exhaust port of the cyl-

inder (x).

3,4

0117571