Repair manual

6 Disassembly

28 Cover/Handle

1. Unscrew the 3 screws (8,9) and take off the side brace (7) and handle (1).

2. Unscrew the Torx screws (11,15) and take off the foot (10 or 16).

3. Unscrew the Torx screw (14) only for item 16, dismantle the bushing (12) and

take out the pulleys (13).

4. Loosen the flanged nut (5) and unscrew the tension screw (3) far enough so that

the screw end does not make contact with the enclosure.

5. Unscrew the flanged nut (5) completely and take off the entire cover (2) with the

fixing device (3,4,6).