Repair manual

10 Maintenance
103 Replacing the suction head
10.8 Replacing the suction head
• The felt filter (13) of the suction head can become clogged during operation.
To ensure an unrestricted flow of fuel to the carburetor, the suction head
should be replaced about every 3 months.
• Unscrew the fuel tank cap (12), pull the retainer out of the tank opening.
• Empty the tank.
• To change it, pull the suction head through the tank cap opening using a wire
hook.
10.9 Replacing the starter rope
• See Chapter 8.7 Assembling the recoil starter.
DANGER
Avoid skin and eye contact with mineral products!