User manual

wc_tx002051gb.fm
31
BS 60-2 / BS 70-2 Maintenance
5 Maintenance
5.1 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
WARNING
A poorly maintained machine can malfunction, causing injuries or permanent
damage to the machine.
f Keep the machine in safe operating condition by performing periodic mainte-
nance and making repairs as needed.
Daily
before
starting
After
first 5
hours
Every
week
or 25
hours
Every
3
months
or 300
hours
Every
year
Check and replace air filter as needed.
3
Check ramming system oil level in sight-
glass.
3
Check fuel line and fittings for cracks or
leaks. Replace as needed.

Tighten ramming shoe hardware.

Inspect the machine.
33
Clean engine cooling fins.
3
Clean and check spark plug gap.

Change ramming system oil.*

Inspect central lifting cable for wear,
damage, or abuse.
3
Replace spark plug.

Inspect and clean fuel filter.
3
* Change ramming system oil after first 50 hours of operation.
Note: If engine performance is poor, check, clean, and replace air filter elements as needed.