User manual

BS 60-2 / 70-2 Foreword
wc_tx001477gb.fm 3
Foreword
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
;
Machine
documentation
 From this point forward in this documentation, Wacker Neuson Production
Americas LLC will be referred to as Wacker Neuson.
 Keep a copy of the Operator’s Manual with the machine at all times.
 Use the separate Parts Book supplied with the machine to order replacement
parts.
 Refer to the separate Repair Manual for detailed instructions on servicing and
repairing the machine.
 If you are missing any of these documents, please contact Wacker Neuson to
order a replacement or visit www.wackerneuson.com.
 When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
Expectations
for
information in
this manual
 This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
 Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
 The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves the right to change
any portion of this information without notice.
Manufacturer’s
approval
This manual contains references to approved parts, attachments, and
modifications. The following definitions apply:
 Approved parts or attachments are those either manufactured or provided by
Wacker Neuson.
 Approved modifications are those performed by an authorized Wacker
Neuson service center according to written instructions published by Wacker
Neuson.
 Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Machine Item Number Revision Machine Item Number Revision
BS 60-2 0009417 Rev 123, 125
Rev 200+
BS 70-2 0009424 Rev 124,
Rev 200+
BS 60-2 0009421 Rev 125,
Rev 200+
BS 70-2 0009425 Rev 122,
Rev 200+
BS 60-2 0620612 Rev 100+ BS 70-2 0009427 Rev 124,
Rev 200+