User manual

wc_si000475gb.fm
20
BS 60-2 / BS 70-2 Labels
M
 Use only Wacker Neuson two-cycle or other fully syn-
thetic oil meeting the NMMA TC-W3, JASO FD, or
ISO-L-EGD specification.
 A gasoline/oil ratio in a range from 50:1 to 100:1 can
be used. For optimum engine performance and dura-
bility, a 100:1 ratio with a fully synthetic oil meeting the
specification described above is preferred.
This label is molded into the cover. If the label becomes
illegible, the cover must be replaced. Refer to the Parts
Book for ordering information.
N
Turtle = Idle/slow engine speed
Rabbit = Full/fast engine speed
This label is molded into the cover. If the label becomes
illegible, the cover must be replaced. Refer to the Parts
Book for ordering information.
O
1. Move the throttle to the IDLE position.
2. Close the choke.
P
WARNING
Operation of this equipment may create sparks that can
start fires around dry vegetation. A spark arrester may
be required. The operator should contact local fire agen-
cies for laws or regulations relating to fire prevention
requirements.
Q
This machine may be covered by one or more patents.
170731
50:1
:
1
181641
2
WARNING
Operation of This Equipment May Create Sparks That Can Start Fires Around Dry
Vegetation. A Spark Arrestor May be Required. The Operator Should Contact Local
Fire Agencies For Laws or Regulations Relating to Fire Prevention Requirements.
Per CAL. PRC. CODE