User manual

wc_si000650gb.fm
12
BS 60-2 / BS 70-2 Safety Information
Safe
operating
practices
When operating this rammer:
 Remain aware of the rammer’s moving parts. Keep hands, feet, and loose
clothing away from the rammer’s moving parts.
 When working near the edges of pits, slopes, trenches and platforms, always
operate the rammer in such a way that there is no possibility of it tipping over or
falling in.
When operating this rammer:
 Do not operate a rammer in need of repair.
 Do not tamper with or disable the function of operating controls.
 Do not leave the rammer running unattended.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while operating this
machine:
 Close-fitting work clothes that do not hinder movement
 Safety glasses with side shields
 Hearing protection
 Safety-toed footwear
After Use  Stop the engine when the machine is not being operated.
 Close the fuel valve on engines equipped with one when machine is not being
operated.
 Ensure that the machine will not tip over, roll, slide, or fall when not being
operated.
 Store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
1.4 Safety Guidelines for Lifting the Machine
When lifting the machine:
 Make sure slings, chains, hooks, ramps, jacks, forklifts, cranes, hoists, and any
other type of lifting device used is attached securely and has enough weight-
bearing capacity to lift or hold the machine safely. See section Technical Data
for machine weight.
 Remain aware of the location of other people when lifting the machine.
 Only use the lifting points and tie-downs described in the Operator’s Manual.
 Make sure the transporting vehicle has sufficient load capacity and platform size
to safely transport the machine.
To reduce the possibility of injury:
 Do not stand under the machine while it is being lifted or moved.
 Do not get onto the machine while it is being lifted or moved.