Product Manual

10 Maintenance
30 100_0202_mt_0015.fm
Replace V-belt
1. Loose the screws on the engine v-belt pulley.
2. Remove engine V-belt pulley.
3. Remove the V-belt from the centrifugal clutch.
4. Press the V-belt down and forward, then remove it from the V-belt pulley on the exciter.
5. Check the number of shims (2 pieces) for completeness.
6. Include a new V-belt at the bottom on the V-belt pulley of the exciter and at the top via the centrifugal
clutch.
7. Include engine V-belt pulley.
8. Screw in screws and fasten them in turn while turning the engine v-belt pulley. The tightening torque
setting is 10 Nm.
9. Assemble the belt guard.