Product Manual

10 Maintenance
100_0202_mt_0015.fm 29
10.2.6 Check and replace V-belt
Check V-belt
1. Disassemble the belt guard.
2. Check the condition of the V-belt and replace if there is visible damage.
3. Clearance approx. 5-15 mm.
Tighten the V-belt
1. Loose the screws on the engine v-belt pulley.
2. Remove external half of V-belt pulley.
3. Remove shims.
 Attach the removed shims to the outside of the V-belt pulley half.
4. Screw in screws and fasten them in turn while turning the engine v-belt pulley. The tightening torque
setting is 10 Nm.
DANGER
Risk of injury from uncontrolled starting of the machine and moving parts.
 Do not operate the machine without belt guard.
Item Designation Item Designation
1 Belt guard 3 Engine V-belt pulley
2 Screws 4 V-belt
1
2
3
4
approx. 5 -