Product Manual

10 Maintenance
26 100_0202_mt_0015.fm
10.1 Maintenance table
10.2 Maintenance work
Carry out preparation work:
1. Place the machine on a level surface.
2. Decommissioning the machine.
3. Allow engine to cool down.
Maintenance work daily Weekly Monthly h
Clean the machine
Visual check for completeness.
Visual check for damage.

Check engine oil level.* 
Check the intake area of the combustion air.* 
Check to ensure the screwed connections are firmly
seated.

Lubricate threaded spindle. 
Clean spark plug, check spark plug air gap.* 
Check hydraulic oil level.*** 
Check/replace V-belt. 
Replace motor oil.* 20 h** / 100 h
Replace fuel filter.*** 100 hours
Clean spark arrester screen.* 100 hours
Clean air cleaner cartridge.* 100 hours
Check valve clearance.*** 300 hours
Check exciter oil level. 150 hours
Replace exciter oil. 100 h** / 250 h
Check hydraulic hose lines.*** 125 hours
Check rubber buffer.*** 125 hours
*
Note the engine operator's manual.
**
Only carry out this work once.
***
Have this work performed by the service department of your Wacker Neuson contact partner.
CAUTION
Health risk from fuel, lubricants and coolants.
 Do not inhale fuel, lubricants, coolants or vapors.
 Avoid contact of skin or eyes with fuel, lubricants and coolants.
WARNING
Risk of fire and explosion from fuel and fuel vapors.
 Do not smoke.
 Do not refuel near open flames.
 Switch off engine and allow it to cool before refueling. Only refuel in a well-ventilated
vicinity.