Product Manual

7 Components and operator's controls
100_0202_cp_0010.fm 19
7.2 Operator's controls
Always keep the display and operator's controls on the machine clean, dry, and free of oil and grease.
Operator's controls, such as the ON/OFF switch, throttle control handles, etc. may not be locked,
manipulated or changed without permission.
Control handle
The control handle is used to continuously regulate the speed and travel direction.
Gas control lever
The speed of the drive motor can be continuously varied from a distance using the gas control lever.
Center pole lock
The center pole lock keeps the center pole in an upright position. To bring the center pole back to the
working position, manually push the center pole lock to the left.
Item Designation Item Designation
1 Control handle 3 Starter rope
2 Gas control lever 4 Center pole lock
1
2
4
3